Dimensions and Weight

RG-AP180P-L

Unit dimensions

(W x H x D)

86 mm x 170 mm x 43 mm ( 3.4 in × 6.7 in × 1.7 in)

Shipping dimensions

(W x D x H)

399 mm x 367 mm x 245 mm ( 15.8 in × 14.5 in × 9.7 in)

Unit weight

Main unit: 0.3 kg (0.66 lbs)

Mounting bracket: 0.1 kg (0.22 lbs)

Shipping weight

0.54 kg (1.19 lbs)

Mounting

Wall-mount (a mounting bracket is delivered with the main unit)

Compatible with 86-mm, EU, and US standard junction boxes

Color

Elegant white

Lock option

Kensington lock

Wi-Fi Radio

RG-AP180P-L

Radio design

Dual-radio and up to four spatial streams:

● Radio 1: 2.4 GHz, two spatial streams, 2x2 MU-MIMO

● Radio 2: 5 GHz, two spatial streams, 2x2 MU-MIMO

Operating frequencies

Radio 1, 802.11b/g/n/ax:

● 2.400 GHz to 2.4835 GHz (HE20/HE40), ISM, channels 1 to 13

Radio 2, 802.11a/n/ac/ax: 

● 5.150 GHz to 5.250 GHz, U-NII-1, channels 36, 40, 44, and 48

● 5.250 GHz to 5.350 GHz, U-NII-2A, channels 52, 56, 60, and 64

● 5.470 GHz to 5.725 GHz, U-NII-2C, channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, and 140

● 5.725 GHz to 5.850 GHz (HE80), U-NII-3/ISM, channels 149, 153, 157, 161, and 165

Note: Country-specific restrictions apply.

Data rates

Combined peak data rate: 2.976 Gbps

Radio 1: 2.4 GHz, 574 Mbps

● Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (max.)

● Two spatial stream Single User (SU) MIMO for up to 287 Mbps wireless data rate to individual 2SS HE20 802.11ax client devices (typical)

Radio 2: 5 GHz, 2.402 Gbps

● Two spatial stream Single User (SU) MIMO for up to 2.402 Gbps wireless data rate to individual 2SS HE160 802.11ax client devices (max.)

● Two spatial stream Single User (SU) MIMO for up to 1.201 Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (typical)

Data rate set

The following 802.11-compliant data rates in Mbps are supported:

2.4 GHz radio

● 802.11b: 1, 2, 5.5, 11

● 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54

● 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)

● 802.11ax: 8.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)

5 GHz radio

● 802.11a: 6, 9, 12, 18, 24, 36, 48, 54

● 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)

● 802.11ac: 6.5 to 1,732 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT160)

● 802.11ax: 8.6 to 2,402 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE160)

Packet aggregation

802.11n/ac/ax: A-MPDU and A-MSDU

Antenna type

Built-in omnidirectional antenna

● 2 x 2.4 GHz antennas

● 2 x 5 GHz antennas

Max. antenna gain

2.4 GHz radio: 3.5 dBi

5 GHz radio: 4.5 dBi

Max. transmit power

2.4 GHz radio: 20 dBm (17 dBm per chain)

5 GHz radio: 20 dBm (17 dBm per chain)

Note: The transmit power is limited by local regulatory requirements.

Power increment

Configurable in increments of 1 dBm

Radio technologies

802.11b: Direct-Sequence Spread-Spectrum (DSSS)

802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)

802.11ax: Orthogonal Frequency Division Multiple Access (OFDMA)

Modulation types

802.11b: BPSK, QPSK, CCK

802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM

802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM

Wi-Fi Radio

Frequency Performance

RG-AP180P-L

Frequency Band and Protocol

Data Rate

Max. Transmit Power per Transmit Chain

Max. Receive Sensitivity per Receive Chain

2.4 GHz, 802.11b

1 Mbps

20 dBm

–96 dBm

2 Mbps

-10 dBm

–94 dBm

5.5 Mbps

-10 dBm

–93 dBm

11 Mbps

-10 dBm

–89 dBm

2.4 GHz, 802.11g

6 Mbps

19 dBm

–91 dBm

24 Mbps

17 dBm

–85 dBm

36 Mbps

17 dBm

–80 dBm

54 Mbps

16 dBm

–74 dBm

2.4 GHz, 802.11n (HT20)

MCS0

19 dBm

–85 dBm

MCS7

16 dBm

–67 dBm

2.4 GHz, 802.11n (HT40)

MCS0

19 dBm

–82 dBm

MCS7

16 dBm

–64 dBm

2.4 GHz, 802.11ax (HE20)

MCS0

18 dBm

–85 dBm

MCS11

12 dBm

–58 dBm

2.4 GHz, 802.11ax (HE40)

MCS0

17 dBm

–82 dBm

MCS11

12 dBm

–54 dBm

5 GHz, 802.11a

6 Mbps

18 dBm

–89 dBm

24 Mbps

17 dBm

–82 dBm

36 Mbps

17 dBm

–78 dBm

54 Mbps

15 dBm

–72 dBm

5 GHz, 802.11n (HT20)

MCS0

18 dBm

–85 dBm

MCS7

14 dBm

–67 dBm

5 GHz, 802.11n (HT40)

MCS0

17 dBm

–82 dBm

MCS7

14 dBm

–64 dBm

5 GHz, 802.11ac (VHT20)

MCS0

18 dBm

–85 dBm

MCS9

13 dBm

–60 dBm

5 GHz, 802.11ac (VHT40)

MCS0

17 dBm

–82 dBm

MCS9

13 dBm

–57 dBm

5 GHz, 802.11ac (VHT80)

MCS0

16 dBm

–82 dBm

MCS9

13 dBm

–56 dBm

5 GHz, 802.11ax (HE20)

MCS0

18 dBm

–85 dBm

MCS11

12 dBm

–58 dBm

5 GHz, 802.11ax (HE40)

MCS0

17 dBm

–82 dBm

MCS11

12 dBm

–54 dBm

5 GHz, 802.11ax (HE80)

MCS0

16 dBm

–82 dBm

MCS11

12 dBm

–52 dBm

5 GHz, 802.11ax (HE160)

MCS0

15 dBm

–79 dBm

MCS11

12 dBm

–50 dBm

Bluetooth Radio

RG-AP180P-L

Bluetooth

Bluetooth 5.1

Antenna type

Onboard omnidirectional antenna

Max. antenna gain

2.4 dBi, with a downtilt angle of roughly 30 degrees

Max. transmit power

10 dBm

Receive sensitivity

–88 dBm (@BLE)

Ports

RG-AP180P-L

Fixed service port

Uplink:

1 x 100/1000/2500Base-T Ethernet port with auto-negotiation, compliant-with IEEE 802.3af/802.3at standard (PoE/PoE+). When powered by 802.3af PoE, LAN 1 cannot supply power to an attached device.

Downlink:

4 x 10/100/1000Base-T Ethernet ports with auto-negotiation. LAN 1 supports 48 V/10 W power supply to an attached device.

Fixed management port

1 x Micro USB console port

Status LED

1 x multi-color system status LED

Button

1 x Reset button

● Press the button for shorter than 2 seconds. Then the device restarts.

● Press the button for longer than 5 seconds. Then the device restores to factory settings.

Power Supply and Consumption

RG-AP180P-L

Input power supply

The AP supports the following two power supply modes:

● 48 V DC/0.6 A power input over DC connector: The DC connector accepts 2.1 mm/5.5 mm center-positive circular plug. A DC power adapter needs to be purchased separately.

● PoE input over PoE-in port: The power source equipment (PSE) complies with IEEE 802.3af/at standard (PoE/PoE+).

Note:

● When powered by 802.3at (PoE+), the AP operates with the optimal performance.

● If both DC power and PoE are available, DC power is preferred.

External power supply

LAN 1 supports 48 V/10 W PoE output to an attached device.

Max power consumption

Max power consumption: 25 W

● DC powered: 25 W

● PoE powered (802.3af): 15 W

● PoE+ powered (802.3at): 25 W

● Idle mode: 8 W

Environment and Reliability

RG-AP180P-L

Temperature

Operating temperature: 0°C to 40°C (–32°F to +104°F)

Storage temperature: –40°C to 70°C (–40°F to +158°F)

Note: At an altitude between 3,000 m (9,843 ft) and 5,000 m (16,404 ft), every time the altitude increases by 220 m (722 ft), the maximum temperature decreases by 1°C (1.8°F).

Humidity

Operating humidity: 5% to 95% RH (non-condensing)

Storage humidity: 5% to 95% RH (non-condensing)

Environment standard

Storage and operating environment: NEBS GR-63-CORE_Issue3_2006 GB/T 2423.6-1995

Mean Time Between Failure (MTBF)

200,000 hours (22 years) at the operating temperature of 25°C (77°F)

Regulatory Compliance

RG-AP180P-L

Regulatory compliance

EN 55032

EN 55035

EN 61000-3-3

EN IEC 61000-3-2

EN 301 489-1

EN 301 489-3

EN 301 489-17

EN 300 328

EN 301 893

EN 300 440

FCC Part 15

EN IEC 62311

IEC 62368-1

EN 62368-1

Applicable software version

RG-AP180P-L

Applicable software version

RGOS11.9(6)W3B3 or higher

WLAN

RG-AP180P-L

Recommended max number of active devices per AP

64

Max. number of BSSIDs

32 (up to 16 BSSIDs per radio)

STA management

SSID hiding

Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently. 

Remote intelligent perception technology (RIPT)

Intelligent load balancing based on the STA quantity or traffic

STA limiting

SSID-based STA limiting

Radio-based STA limiting

Bandwidth limiting

STA/SSID/AP-based rate limiting

Wireless roaming

Layer 2 and Layer 3 roaming

Security and Authentication

RG-AP180P-L

Authentication and encryption

Remote Authentication Dial-In User Service (RADIUS)

PSK, web, 802.1x, WPA, WPA2, and WPA3 authentication

WPA3-Personal (SAE) and WPA3-Personal hybrid

QR code-based guest authentication

SMS authentication

MAB authentication

Data encryption: WPA-TKIP, WPA-PSK, WPA2-AES, WEP (64/128-bit)

Data frame filtering

Allowlist, static blocklist, and dynamic blocklist

ACL

Dynamic ACL assignment

● ACL assignment based on time spans

● ACL assignment (complete entry) based on MAC addresses

● Execution of pre-configured ACLs (entry index) based on MAC addresses

CPP

Supported

NFPP

Supported

Routing and Switching

RG-AP180P-L

IP service

Static IPv4 address and DHCP-assigned IPv4 address

Multicast

Multicast-to-unicast conversion

IPv6 basics

IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 Ping

IPv6 DHCP Client

IP routing

IPv4/IPv6 static routing

VPN

PPPoE client

IPsec VPN

Management

RG-AP180P-L

Network management

NTP server and NTP client

SNTP client

SNMP v1/v2c/v3

Fault inspection and alarm

Information statistics and logging

Network management platform

Web-based management (Eweb)

STA access management

Console and Telnet-based management

FTP client and TFTP client

Fat/Fit/Cloud mode switchover

When the AP works in Fit mode, it can be switched to Fat mode through an AC.

When the AP works in Fat mode, it can be switched to Fit mode through the console port or Telnet.

When the AP works in Cloud mode, it can be managed through Ruijie Cloud.