24 x 100/1000/2.5G/5GBASE-T ports for access, 4 x 10GE/25GE SFP28 ports for uplink, meeting high bandwidth demands of large campuses
Multi-level hardware protection, ensuring continuous device operation and stable network connectivity
VSU, delivering flexible networking capabilities and high performance
Multiple network security policies and real-time monitoring, ensuring consistently high network performance
Intelligent fan speed adjustment and auto port sleeping, reducing power consumption and noises
Various network management methods, achieving simplified network maintenance

Features
Specifications
Resources
Order Information

Sales Enquiry

Features

RG-S6110-24MG4VS-UP 5G Multi-GE Access Switches

24 x 100/1000/2.5G/5GBASE-T ports and 4 x 10GE/25GE SFP28 uplink ports are provided to realize flexible networking.
High-power PoE++ is provided and a maximum of 90 W PoE power supply meets different terminal needs.

Port

Dimensions

Hardware Redundancy, Guaranteed Service Continuity and Network Connectivity

Hardware-Level Boot Redundancy

Optical Port Fault Isolation

Two Flash chips are used to store the system Boot program for hardware-level Boot redundancy, avoiding device failure caused by a failed Flash chip.

VSU Virtualization, Flexible Networking and High Performance

Millisecond Failover

High Scalability

Simplified Networking

Connected by an aggregate link, the VSU virtual system and peripherals switch links in milliseconds to ensure service continuity in case of a failure.

Network Security Policies and Real-Time Monitoring, Delivering Enhanced Network Robustness

CPP

NFPP

CPP protects the CPU from data attacks to ensure CPU stability under high usage, achieving significant improvement in the device's security performance.

Intelligent Speed Regulation and Auto Sleeping, Reducing Energy Consumption and Noise

Intelligent fan speed regulation based on monitored component temperatures, saving energy
Auto service port sleeping, reducing device power consumption.

Managed by the INC Controller to Achieve Easy and Efficient O&M Management

The switch automatically completes registration and configuration after it accesses the all-optical network, achieving plug and play, no commissioning and fast onboarding.

You can check the link health status, handle alarms and troubleshoot faults through the INC, which dramatically improves the O&M efficiency.

A switch can be flexibly replaced based on service needs without reconfiguration. Service ports supports auto-sensing, achieving automatic O&M.

Fast Onboarding

Optical Link O&M

Zero Touch Replacement

Specifications

Hardware Specifications

Port specifications	RG-S6110-24MG4VS-UP	RG-S6120-24XMG4XS4VS-UP-H	RG-S6110-48MG4VS2QXS-UP	RG-S6120-48XMG4VS2QXS-UP-H
Fixed service port	24 x 100/1000/2.5G/5GBASE-T ports, supporting PoE/PoE+/PoE++ 4 x 10GE/25GE SFP28 ports	24 x 100/1000/2.5G/5G/10GBASE-T ports, supporting PoE/PoE+/PoE++ 4 x 1GE/10GE SFP+ ports 4 x 10GE/25GE SFP28 ports	48 x 100/1000/2.5G/5GBASE-T ports ● Ports 1 to 24 support PoE/PoE+/PoE++ ● Ports 25 to 48 support PoE/PoE+ 4 x 10GE/25GE SFP28 ports 2 x 40GE QSFP+ ports	48 x 100/1000/2.5G/5G/10GBASE-T ports ● Ports 1 to 24 support PoE/PoE+/PoE++ ● Ports 25 to 48 support PoE/PoE+ 4 x 10GE/25GE SFP28 ports 2 x 40GE QSFP+ ports
Module slot	Not Supported	2 x power module slots 3 x fan module slots
Power module	Not Supported	RG-PA600I-P-F RG-PA1000I-P-F
Fan module	Not Supported	M2SFAN I-F (pre-installed 3)
Fixed management port	1 x RJ45 console port 1 x RJ45 MGMT port
USB	1 x USB 2.0 port

System specifications	RG-S6110-24MG4VS-UP	RG-S6120-24XMG4XS4VS-UP-H	RG-S6110-48MG4VS2QXS-UP	RG-S6120-48XMG4VS2QXS-UP-H
System packet forwarding rate *1	392 Mpps	678 Mpps	750 Mpps	982 Mpps
System switching capacity *2	528 Gbps	912 Gbps	1008 Gbps	1320 Gbps
CPU	Single-core CPU, with the clock speed of 1.2 GHz
Real-time clock (RTC)	Supported
BootROM	16 MB (storing boot software for 1+1 boot redundancy)
Flash memory	1 GB (storing boot software for 1+1 boot redundancy)
Memory	1 GB DDR4 (32-bit width, 4-bit ECC)	1 GB DDR4 (32-bit width, 4-bit ECC)	2 GB DDR4 (32-bit width, 4-bit ECC)	2 GB DDR4 (32-bit width, 4-bit ECC)
Switch buffer	4 MB
Number of MAC addresses	Number of global MAC addresses: 32,768 Number of static MAC addresses: 1,000
ARP table size	16,000
ND table size	4,000
Number of IPv4 unicast routes	16,000
Number of IPv4 multicast routes	4,000
Number of IPv6 unicast routes	16,000
Number of IPv6 multicast routes	2,000
Number of IGMP groups	4,000
Number of MLD groups	1,000
Number of ACEs	Ingress: 2,500 Egress: 1,000
Number of VSU members	2

*1 means the system's packet forwarding rate.

*2 means the system's switching capacity.

Power supply and consumption	RG-S6110-24MG4VS-UP
Power supply	1 x fixed power supply
Power input	AC input: ● Rated input voltage: 100 V AC to 240 V AC, 50/60 Hz ● Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz ● Maximum input current: 6 A
Maximum output power	Fixed power supply: 460 W
PoE port	Ports 1 to 24 support PoE/PoE+/PoE++ (IEEE802.3af/at/bt) power supply
PoE power cable pairs	Four pairs (1-2, 3-6, 4-5, and 7-8 pairs)
PoE output power	Each PoE port provides up to 90 W of power. The maximum power is 370 W. Note: The maximum number of powered devices supported by the switch is determined by the available power of the switch and the actual power consumption of each device.
Maximum power consumption	90 W (without PoE) 460 W (full PoE load)

Power supply and consumption	RG-S6120-24XMG4XS4VS-UP-H	RG-S6110-48MG4VS2QXS-UP	RG-S6120-48XMG4VS2QXS-UP-H
Power supply	2 x pluggable power modules
Power input	RG-PA600I-P-F (AC input): ● Rated input voltage: 100 V AC to 240 V AC, 50/60 Hz ● Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz ● Maximum input current: 8 A RG-PA1000I-P-F (AC input 1): ● Rated input voltage: 100 V AC to 130 V AC, 50/60 Hz ● Maximum input voltage: 90 V AC to 143 V AC, 47 Hz to 63 Hz ● Maximum input current: 12 A RG-PA1000I-P-F (AC input 2): ● Rated input voltage: 200 V AC to 240 V AC, 50/60 Hz ● Maximum input voltage: 180 V AC to 264 V AC, 47 Hz to 63 Hz ● Maximum input current: 8 A
Maximum output power	RG-PA600I-P-F: 600 W RG-PA1000I-P-F: ● 100 V AC to 130 V AC: 930 W ● 200 V AC to 240 V AC: 1000 W
PoE port	Ports 1 to 24 support PoE/PoE+/PoE++ (IEEE802.3af/at/bt) power supply	Ports 1 to 24 support PoE/PoE+/PoE++ (IEEE802.3af/at/bt) power supply Ports 25 to 48 support PoE/PoE+ (IEEE 802.3af/at) power supply
PoE power cable pairs	Four pairs (1-2, 3-6, 4-5, and 7-8 pairs)
PoE output power	Each PoE port provides up to 90 W of power The maximum power depends on the configured power supply ● 1 x RG-PA600I-P-F：450 W ● 1 x RG-PA1000I-P-F: 760 W (100 V AC to 130 V AC) ● 1 x RG-PA1000I-P-F: 850 W (200 V AC to 240 V AC) ● 2 x RG-PA600I-P-F：930 W ● 1 x RG-PA600I-P-F + 1 x RG-PA1000I-P-F：1200 W (100 V AC to 130 V AC) ● 1 x RG-PA600I-P-F + 1 x RG-PA1000I-P-F：1290 W (200 V AC to 240 V AC) ● 2 x RG-PA1000I-P-F: 1470 W (100 V AC to 130 V AC) ● 2 x RG-PA1000I-P-F: 1650 W (200 V AC to 240 V AC)	Each port of ports 1 to 24 provides up to 90 W of power Each port of ports 25 to 48 provides up to 30 W of power The maximum power depends on the configured power supply ● 1 x RG-PA600I-P-F：400 W ● 1 x RG-PA1000I-P-F: 710 W (100 V AC to 130 V AC) ● 1 x RG-PA1000I-P-F: 800 W (200 V AC to 240 V AC) ● 2 x RG-PA600I-P-F：880 W ● 1 x RG-PA600I-P-F + 1 x RG-PA1000I-P-F：1150 W (100 V AC to 130 V AC) ● 1 x RG-PA600I-P-F + 1 x RG-PA1000I-P-F：1240 W (200 V AC to 240 V AC) ● 2 x RG-PA1000I-P-F: 1420 W (100 V AC to 130 V AC) ● 2 x RG-PA1000I-P-F: 1600 W (200 V AC to 240 V AC)
Maximum power consumption	150 W (without PoE load) 1,800 W (full PoE load)	200 W (without PoE load) 1,800 W (full PoE load)

Note: The maximum number of powered devices supported by the switch is determined by the available power of the switch and the actual power consumption of each device.

Dimensions and weight	RG-S6110-24MG4VS-UP	RG-S6120-24XMG4XS4VS-UP-H	RG-S6110-48MG4VS2QXS-UP	RG-S6120-48XMG4VS2QXS-UP-H
Unit dimensions (W x D x H)	442.0 mm x 220.0 mm x 43.6 mm (17.40 in. x 8.66 in. x 1.72 in.)	442.0 mm x 420.0 mm x 43.6 mm (17.40 in. x 16.54 in. x 1.72 in.)
Shipping dimensions (W x D x H)	568 mm x 366 mm x 226 mm (22.36 in. x 14.41 in. x 8.90 in.)	563 mm x 563 mm x 210 mm (22.17 in. x 22.17 in. x 8.27 in.)
Rack height	1 RU	1 RU
Unit weight	3.71 kg (8.18 lbs)	5.86 kg (12.92 lbs, with 3 fan modules)	6.18 kg (13.62 lbs, with 3 fan modules)	6.18 kg (13.62 lbs, with 3 fan modules)
Shipping weight	5.37 kg (11.84 lbs)	8.12 kg (17.90 lbs, with 3 fan modules)	8.42 kg (18.56 lbs, with 3 fan modules)	8.42 kg (18.56 lbs, with 3 fan modules)

Environment and reliability	RG-S6110-24MG4VS-UP	RG-S6120-24XMG4XS4VS-UP-H	RG-S6110-48MG4VS2QXS-UP	RG-S6120-48XMG4VS2QXS-UP-H
Temperature	Operating temperature: 0°C to 45°C (32°F to 113°F) Storage temperature: -40°C to +70°C (-40°F to +158°F) Note: At an altitude between 3,000 m (9,842.52 ft.) and 5,000 m (16,404.20 ft.), every time the altitude increases by 220 m (721.78 ft.), the maximum temperature decreases by 1°C (1.8°F).
Humidity	Operating humidity: 10% to 90% RH (non-condensing) Storage humidity: 5% to 95% RH (non-condensing)
Altitude	Operating altitude: –500 m to +5,000 m (–1640.42 ft. to +16,404.20 ft.) Storage altitude: –500 m to +5,000 m (–1640.42 ft. to +16,404.20 ft.)
Mean time between failure (MTBF)	194,296 hours (about 22 years)	194,296 hours (about 22 years)	236,695 hours (about 27 years)	236,695 hours (about 27 years)
Fan	2 x fixed fan modules	3 x pluggable fan modules
Heat dissipation	Fan cooling, left-to-right and front-to-right airflow	Fan cooling, left-to-rear and front-to-rear airflow
Acoustic noise	27°C (80.6°F): 40 dB Maximum value: < 78 dB	27°C (80.6°F): 60 dB Maximum value: < 78 dB
Power module redundancy	Not supported	1+1 redundancy	1+1 redundancy	1+1 redundancy
Fan redundancy	Not supported	2+1 redundancy	2+1 redundancy	2+1 redundancy
Power module hot swapping	Supported
USB hot swapping	Supported
Cable hot swapping	Supported
Power supply monitoring	Not supported	Monitoring of the power supply model and status Power supply failure alarming
Fan monitoring	Automatic speed adjustment Fan failure alarming
Temperature monitoring	Supported
ESD	ESD contact/air discharge: 6 kV/8 kV ESD susceptibility contact/air discharge: 8 kV/15 kV
Surge protection	MGMT port: 4 kV Service port: 8 kV Power port: common mode 6 kV, differential mode 6 kV

Certifications and regulatory compliance	RG-S6110-24MG4VS-UP	RG-S6120-24XMG4XS4VS-UP-H	RG-S6110-48MG4VS2QXS-UP	RG-S6120-48XMG4VS2QXS-UP-H
Safety regulation	IEC 62368-1
EMC regulation	EN 300386, EN 55032 Class A, EN 55035, EN IEC 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11
RoHS	European RoHS Directive 2011/65/EU & Amendment(EU) 2015/863

Software Specifications

Feature	RG-S6100 Series
Ethernet switching	Jumbo frame (maximum length: 9,216 bytes)
	IEEE 802.1Q (supporting 4K VLANs)
	Maximum number of VLANs that can be created: 4,094
	Voice VLAN
	Super-VLAN and private VLAN
	MAC address-based, port-based, protocol-based, and IP subnet-based VLAN assignment
	GVRP
	Basic QinQ and selective QinQ
	STP (IEEE 802.1.d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)
	ERPS (G.8032)
	LACP (IEEE 802.3ad)
	LLDP/LLDP-MED
IP service	Static and dynamic ARP
	DHCP server, DHCP client, DHCP relay, and DHCP snooping
	DNS
	DHCPv6 server, DHCPv6 client, DHCPv6 relay, and DHCPv6 snooping
	Neighbor Discovery (ND) and ND snooping
IP routing	Static routing
	RIP and RIPng
	OSPFv2 and OSPFv3
	GR
	IS-ISv4 and IS-ISv6
	BGP4 and BGP4+
	Equal and Weighted Cost Multi-Path (ECMP)
	Packet-based and flow-based load balancing
	Stateless Auto Configuration
	IPv4/IPv6 VRF
	IPv4/IPv6 PBR
Multicast	IGMPv1/v2/v3 and IGMP proxy
	IGMPv1/v2/v3 snooping
	IGMP filtering and IGMP fast leave
	PIM-DM, PIM-SM, and PIM-SSM
	PIM-SSM for IPv4 and IPv6
	MSDP to achieve inter-domain multicast
	MLDv1/v2
	MLD snooping
	MSDP
	PIM-SMv6
	Multicast source IP address check Multicast source port check
	Multicast querier
ACL and QoS	Standard IP ACLs (hardware ACLs based on IP addresses)
	Extended IP ACLs (hardware ACLs based on IP addresses or TCP/UDP port numbers)
	Extended MAC ACLs (hardware ACLs based on source MAC addresses, destination MAC addresses, and optional Ethernet type)
	Expert-level ACLs (hardware ACLs based on flexible combinations of the VLAN ID, Ethernet type, MAC address, IP address, TCP/UDP port number, protocol type, and time range)
	Time-based ACLs
	ACL80 and IPv6 ACL
	Applying ACLs globally (hardware ACLs based on flexible combinations of the VLAN ID, Ethernet type, MAC address, IP address, TCP/UDP port number, protocol type, and time range)
	ACL redirection
	Port traffic identification
	Port traffic rate limiting
	802.1p/DSCP/ToS traffic classification
	Traffic classification based on 802.1p priorities, DSCP priorities, and IP precedences
	Traffic classification based on ToS values
	Congestion management: SP, WRR, DRR, WFQ, SP+WRR, SP+DRR, and SP+WFQ
	Congestion avoidance: tail drop, RED, and WRED
	Eight queues on each port
	Rate limiting in each queue
Security	Multi-AAA
	RADIUS and TACAS+
	Filtering of invalid MAC addresses Broadcast storm suppression Hierarchical management of administrators and password protection BPDU guard
	RADIUS authentication and authorization
	Port- and MAC address-based 802.1x authentication
	IEEE802.1X authentication, MAC address bypass (MAB) authentication, and interface-based and MAC address-based 802.1X authentication
	Web authentication
	Hypertext Transfer Protocol Secure (HTTPS)
	SSHv1 and SSHv2
	Global IP-MAC binding
	ICMPv6
	Port security
	IP source guard
	SAVI
	ARP spoofing prevention
	CPP and NFPP
	Various attack defense functions including NFPP, ARP anti-spoofing, DHCP/DHCPv6 attack defense, ICMP attack defense, ND attack defense, IP scanning attack defense, and customizing attack defense packet types
	Loose and strict RPF uRPF ignoring default routes
Reliability	REUP
	ERPS (G.8032)
	Rapid Link Detection Protocol (RLDP), Layer 2 link connectivity detection, unidirectional link detection, and VLAN-based loop control
	Data Link Detection Protocol (DLDP)
	IPv4 VRRP v2/v3 and IPv6 VRRP
	BFD
	GR for RIP, OSPF, and BGP
	Power modules in 1+1 redundancy mode
	Hot swapping of power modules and fan modules (not supported by the RG-S6110-24MG4VS-UP)
Device virtualization	VSU
NMS and maintenance	SPAN, RSPAN, and ERSPAN
	sFlow
	NTP and SNTP
	FTP and TFTP
	SNMP v1/v2/c3
	RMON (1, 2, 3, 9)
	Various types of RMON groups, including event groups, alarm groups, history groups, and statistics groups, as well as private alarm extension groups RMON used to implement Ethernet statistics, historical statistics, and alarm functions
	NETCONF
	Flow-based mirroring, and N:1 and 1:N port mirroring
	CWMP
	gRPC
	OpenFlow Special 1.3 Flow table analysis defined by all protocols Transmission of specified packets to the controller Configuring the controller's IP address and port Notifying port status changes to the controller
	CLI (Telnet/console), SSH, Syslog, SNMP over IPv6, Telnet v6, FTP/TFTP v6, DNS v6, and NTP for IPv6
	Ruijie Could-based management

Note: The item marked with the asterisk (*) will be available in the future.

Resources All Resources

Learn about Products or Solutions

Product Datasheet

Software and Configuration

Order Information

The switch, expansion module, power module, and other components can be ordered as needed. Before ordering an expansion module or power module, contact the online customer service personnel for the latest support information about the module.

Switches and Power Modules

Model	Description
RG-S6110-24MG4VS-UP	24 x 100/1000/2.5G/5GBASE-T ports, 4 x 10GE/25GE SFP28 ports
RG-S6120-24XMG4XS4VS-UP-H	24 x 100/1000/2.5G/5G/10GBASE-T ports, supporting PoE/PoE+/PoE++, 4 x 1GE/10GE SFP+ ports, 4 x 10GE/25GE SFP28 ports
RG-S6110-48MG4VS2QXS-UP	48 x 100/1000/2.5G/5GBASE-T ports, 4 x 10GE/25GE SFP28 ports, 2 x 40GE QSFP+ ports
RG-S6120-48XMG4VS2QXS-UP-H	48 x 100/1000/2.5G/5G/10GBASE-T ports, 4 x 10GE/25GE SFP28 ports, 2 x 40GE QSFP+ ports
RG-PA600I-P-F	600 W AC power module
RG-PA1000I-P-F	1000 W AC power module

Note:

4x 1GE/10GE SFP+ ports support 1GE SFP transceivers, 10GE SFP+ transceivers.
4 x10GE/25GE SFP28 ports support 10GE SFP+ transceivers and 25GE SFP28 transceivers. All 10GE/25GE SFP28 ports must work at the same rate, either 25G or 10G.
2 x 40GE QSFP+ ports support 40GE QSFP+ transceivers. The port can work in 4 x 10GE mode.

Optical Transceivers and Cables

1GE

Model	Description
Mini-GBIC-GT	1000BASE-X to 1000BASE-T, copper SFP transceiver, RJ45, 100 m over Cat 5e/6/6a The port needs to be configured with auto-negotiation
MINI-GBIC-SX-MM850	1000BASE-SX, SFP transceiver, 850 nm, Duplex LC, 500 m over MMF
MINI-GBIC-LX-SM1310	1000BASE-LX, SFP transceiver, 1310 nm, Duplex LC, 10 km over SMF
MINI-GBIC-LH40-SM1310	1000BASE-LH, SFP transceiver, 1310 nm, Duplex LC, 40 km over SMF
MINI-GBIC-ZX80-SM1550	1000BASE-ZX, SFP transceiver, 1550 nm, Duplex LC, 80 km over SMF
GE-SFP-LX20-SM1310-BIDI	1000BASE-LX, SFP transceiver, TX1310/RX1550, BiDi LC, 20 km over SMF
GE-SFP-LX20-SM1550-BIDI	1000BASE-LX, SFP transceiver, TX1550/RX1310, BiDi LC, 20 km over SMF
GE-SFP-LH40-SM1310-BIDI	1000BASE-LH, SFP transceiver, TX1310/RX1550, BiDi LC, 40 km over SMF
GE-SFP-LH40-SM1550-BIDI	1000BASE-LH, SFP transceiver, TX1550/RX1310, BiDi LC, 40 km over SMF
GE-SFP-LX03-SM1310-BIDI-I	1000BASE-LX, SFP transceiver, TX1310/RX1550, BiDi LC, 3 km over SMF
GE-SFP-LX03-SM1550-BIDI-I	1000BASE-LX, SFP transceiver, TX1550/RX1310, BiDi LC, 3 km over SMF

Note: BiDi transceivers must be used in pairs. If one end uses GE-SFP-LX20-SM1310-BIDI, the other end must use GE-SFP-LX20-SM1550-BIDI.

10GE

Model	Description
XG-SFP-SR-MM850	10GBASE-SR, SFP+ transceiver, 850nm, Duplex LC, 300 m over MMF
XG-SFP-LR-SM1310	10GBASE-LR, SFP+ transceiver, 1310nm, Duplex LC, 10 km over SMF
XG-SFP-ER-SM1550	10GBASE-ER, SFP+ transceiver, 1550nm, Duplex LC, 40 km over SMF
XG-SFP-ZR-SM1550	10GBASE-ZR, SFP+ transceiver, 1550nm, Duplex LC, 80 km over SMF
XG-SFP-LR10-SM1270-BIDI-I	10GBASE-LR, SFP+ transceiver, TX1270/RX1330, BiDi LC, 10 km over SMF
XG-SFP-LR10-SM1330-BIDI-I	10GBASE-LR, SFP+ transceiver, TX1330/RX1270, BiDi LC, 10 km over SMF
XG-SFP-AOC1M	10GBASE, SFP+ active optical cable (AOC), 1 m, including one cable and two optical transceivers
XG-SFP-AOC3M	10GBASE, SFP+ active optical cable (AOC), 3 m, including one cable and two optical transceivers
XG-SFP-AOC5M	10GBASE, SFP+ active optical cable (AOC), 5 m, including one cable and two optical transceivers

25GE

Model	Description
VG-SFP-SR-MM850	25GBASE-SR, SFP28 transceiver, 850 nm, Duplex LC, 100 m over OM4 MMF, 70 m over OM3 MMF
VG-SFP-AOC5M	25GBASE, SFP28 active optical cable (AOC), 5 m, including one cable and two optical transceivers

40GE

Model	Description
40G-QSFP-LSR-MM850	40GBASE-LSR, QSFP+ transceiver, 850 nm, MPO 1 x 12, 400 m over OM4 MMF, 300 m over OM3 MMF
40G-QSFP-LR4-SM1310	40GBASE-LR4, QSFP+ transceiver, 1310 nm, Duplex LC, 10 km over SMF
40G-QSFP-iLR4-SM1310	40GBASE-iLR4, QSFP+ transceiver, 1310 nm, Duplex LC, 2 km over SMF
40G-QSFP-LX4-SM1310	40GBASE-LX4, QSFP+ transceiver, 1310 nm, Duplex LC, 150 m over OM3/OM4 MMF, 2 km over SMF
40G-AOC-5M	40GBASE, QSFP+ active optical cable (AOC), 5 m, including one cable and two optical transceivers

Education

5-Star Hotel Solution

RG-S6110-24MG4VS-UP 24-Port 5G Managed Multi-GE Access Switches with 25G Uplink Ports

RG-S6110-24MG4VS-UP 5G Multi-GE Access Switches

24 x 100/1000/2.5G/5GBASE-T ports and 4 x 10GE/25GE SFP28 uplink ports are provided to realize flexible networking.
High-power PoE++ is provided and a maximum of 90 W PoE power supply meets different terminal needs.