Clos orthogonal architecture, delivering non-blocking forwarding and high-speed transmission without packet loss
RGOS, a fully-decoupled modular operating system, providing independent components and nonstop services
Multiple hardware-level protection, offering carrier-class reliability and ensuring continuous operation without downtime
Fan connections in in-line mode and innovative Y-shaped airflow, improving heat dissipation efficiency and enhancing system reliability
Support for SDN, achieving rapid deployment and automated O&M for campus networks

Key Specification
Features
Specifications
Resources
Order Information
FAQ

Sales Enquiry

Key Specification View More

Features

RG-N18014-E
High-density Core Switch for Cloud Architecture Network

Up to 52 x 10GE ports and 12 x 100GE ports per line card, and up to 768 x 10GE ports and 96 x 100GE ports per switch
Fit for data centers, MANs, campus networks, and scenarios with data centers and campus networks

Front Panel

Rear Panel

Eight line card slots,
supporting at most eight line cards

Line cards for your reference：

M18000E-8SFX
8 x SFX 10GE ports
(CWDM line card for core switches, applicable to SOE solution 3.0)

M18000E-8SFG
8 x SFG GE ports
(CWDM line card for core switches, applicable to SOE solution 3.0)

M18000E-HCA
Large-capacity carrier card for authentication, supporting two DNMX interface cards
20 x 10GE optical ports
4 x 100GE optical ports

Clos Architecture, Delivering Non-Blocking Forwarding and High-Speed Transmission Without Packet Loss

All line cards and switch fabric modules adopt the orthogonal architecture. Cross-line card traffic is transmitted to switch fabric modules through orthogonal connectors, with low transmission loss. This greatly reduces signal attenuation and improves service traffic transmission efficiency.

RGOS, a Fully-Decoupled Modular OS, Providing Independent Components and Nonstop Services

Completely decoupled service components, allowing automatic recovery upon component failures and ensuring high availability of the system
Live upgrade of service component functions, ensuring uninterrupted network for online function expansion

High availability

Fault elimination in seconds

Hot patch upgrade

Low CPU usage

Multiple Hardware Protection, Offering Carrier-class Reliability and Ensuring Continuous Operation Without Downtime

Hardware-level Dual Redundancy

Faulty Optical Port Isolation

Dual-boot at the hardware level
Two flash chips used to store boot software to achieve hardware-level boot redundancy, avoiding switch boot failures due to flash chip faults

Fan Connections in In-line Mode and Y-Shaped Airflow, Improving Heat Dissipation and Enhancing System Reliability

Compared with the conventional single fan, fans connected in in-line mode improve the performance by 50% and provide better airflow. Y-shaped airflow design with front and right air inlets and rear air outlets forms a three-dimensional heat dissipation channel, improving heat dissipation efficiency. The airflow of line cards and switch fabric modules is separated from each other, enhancing system reliability.

Supporting SDN, Providing Rapid Deployment and Automated O&M for Campus Networks

Lightweight access control with one-click approval, allowing fast and secure terminal access

Policy migration in the case of terminal mobility, improving network access efficiency

Visual display of network traffic, allowing fast fault location, and realizing rapid production network recovery through automated O&M

Customized exclusive virtual network, allowing networks to support services efficiently through flexible resource adjustment

One-click approval

Policy migration

Visualization

Virtualization

Specifications

Hardware Specifications

Port Specifications	RG-N18010-E	RG-N18014-E
Module slot	2 x supervisor module slots 8 x line card slots 4 x switch fabric module slots 4 x power module slots 2 x fan module slots	2 x supervisor module slots 12 x line card slots 4 x switch fabric module slots 4 x power module slots 2 x fan module slots
Supervisor module	M18000E-CM M18000E-CM II Note: The supervisor modules of the M18000E-CM and M18000E-CM II are incompatible with each other. Do not insert them into the same chassis. The main program versions of the two supervisor modules are independent.
Switch fabric module	M18010E-FE-X I M18000E-FE-X II	M18000E-FE-X II
Line card	M18000E-48GT4XS-XA M18000E-48SFP4XS-XA M18000E-24GT8SFP8XS-XA M18000E-32XS-XB M18000E-52XS-XB M18000E-12CQ-XB M18000E-8SFG M18000E-8SFX M18000E-HCA (modular line card) ● HCA-4CQ (modular port adapter) ● HCA-20XS (modular port adapter)
Power module	RG-PA600I RG-PA1600I
Fan module	M10C-FAN (pre-installed 2)	M14FAN-F (pre-installed 2)
Module management port	Supervisor module: ● 1 x RJ45 console port ● 1 x RJ45 MGMT port Switch fabric module: ● 1 x RJ45 console port
USB	Supervisor module: 1 x USB 2.0 port (no capacity limit, 2G/4G/8G/16G/32G capacity tested)

System Specifications	RG-N18010-E	RG-N18014-E
System packet forwarding rate *1	14,200 Mpps	21,000 Mpps
System switching capacity *2	19.2 Tbps	28.8 Tbps
CPU	Supervisor module: ● M18000E-CM: quad-core CPU, each core with the clock speed of 2.2 GHz ● M18000E-CM II: octa-core CPU, each core with the clock speed of 2.2 GHz Switch fabric module: ● Quad-core CPU, each core with the clock speed of 2.2 GHz Line card: ● M18000E-XA/XB/CWDM card: quad-core CPU, each core with the clock speed of 2.2 GHz ● M18000E-HCA: octa-core CPU, each core with the clock speed of 2.2 GHz
Real-time clock (RTC)	M18000E-CM/CM II: supported
BootROM	M18000E-CM/CM II: 16 MB XA/XB/CWDM/FE card: 16 MB M18000E-HCA: 16 MB
Flash memory	M18000E-CM: 8 GB M18000E-CM II: 16 GB XA/XB/CWDM/FE card: 8 GB M18000E-HCA: 16 GB
Memory	M18000E-CM: 4 GB DDR4 M18000E-CM II: 16 GB DDR4 XA/XB/CWDM/FE card: 4 GB DDR4 M18000E-HCA: 16 GB DDR4
Switch buffer	XA card: 4 MB XB/CWDM/HCA card: 35 MB
Number of MAC address	Number of static MAC addresses ● XA card: 4,000 ● XB card: 10,000 ● HCA card: 10,000 Number of global MAC addresses ● XA card: 96,000 (installed without the HCA card); 150,000 (installed with the HCA card) ● XB card: 256,000 (installed without the HCA card); 512,000 (installed with the HCA card) ● HCA card: 512,000
ARP table size	XA card: 40,000 (installed without the HCA card); 64,000 (installed with the HCA card) XB card: 96,000 HCA card: 96,000
Number of IPv4 unicast routes	XA card: 64,000 (shared with IPv6 routes, installed without the HCA card); 1,500,000 (installed with the HCA card) XB card: 350,000 (shared with IPv6 routes, installed without the HCA card); 1,500,000 (installed with the HCA card) HCA card: 1,500,000 (shared with IPv6 routes)
Number of IPv4 multicast routes	XA card: 4,000 XB card: 4,000 HCA card: 4,000
Number of IPv6 unicast routes	XA card: 15,000 (≤ 64 bytes, shared with IPv4 routes, installed without the HCA card); 1,000,000 (installed with the HCA card) XB card: 65,000 (installed without the HCA card); 1,000,000 (installed with the HCA card) HCA card: 1,000,000
Number of IPv6 multicast routes	XA card: 2,000 XB card: 2,000 HCA card: 2,000
Number of ACEs	XA card: ● Ingress: 7,000 ● Egress: 1,500 XB card: ● Ingress: 28,000 (installed without the HCA card); 24,000 (installed with the HCA card) ● Egress: 4,000 HCA card: ● Ingress: 24,000 ● Egress: 4,000
Number of VSU members	2

* 1 means the system's packet forwarding rate.

* 2 means the system's switching capacity.

Power Supply and Consumption	RG-N18010-E	RG-N18014-E
Power supply	4 x pluggable power modules
Power input	RG-PA600I (AC input): ● Rated input voltage: 100 V AC to 240 V AC, 50/60 Hz ● Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz ● Maximum input current: 10 A RG-PA1600I (AC input): ● Rated input voltage: 100 V AC to 240 V AC; 50/60 Hz ● Maximum input voltage: 90 V AC to 264 V AC; 47 Hz to 63 Hz ● Maximum input current: 16 A
Maximum output power	RG-PA600I: 600 W RG-PA1600I: ● 100 V AC to 176 V AC: 1200 W ● 176 V AC to 240 V AC: 1600 W
Module power consumption	Supervisor module: ● M18000E-CM: < 60 W ● M18000E-CM II: < 70 W Switch fabric module: ● M18000E-FE-X II: < 160 W Line card: ● M18000E-48GT4XS-XA: < 85 W ● M18000E-48SFP4XS-XA: < 117 W ● M18000E-24GT8SFP8XS-XA: < 95 W ● M18000E-32XS-XB: < 149 W ● M18000E-52XS-XB: < 250 W ● M18000E-12CQ-XB: < 240 W ● M18000E-8SFG: < 250 W ● M18000E-8SFX: < 250 W ● M18000E-HCA: < 280 W ● HCA-20XS: < 30 W ● HCA-4CQ: < 20 W
	Switch fabric module: ● M18000E-FE-X I: < 50 W Fan module: ● M10C-FAN: < 216 W	Fan module: ● M14FAN-F: < 360 W

Dimensions and Weight	RG-N18010-E	RG-N18014-E
Unit dimensions (W x D x H)	442.0 mm x 561.0 mm x 442.5 mm (17.40 in. x 22.09 in. x 17.42 in., cable management bracket excluded) 442.0 mm x 670.1 mm x 442.5 mm (17.40 in. x 26.38 in. x 17.42 in., cable management bracket included)	442.0 mm x 561.0 mm x 605.1 mm (17.40 in. x 22.09 in. x 23.82 in., cable management bracket excluded) 442.0 mm x 670.1 mm x 605.1 mm (17.40 in. x 26.38 in. x 23.82 in., cable management bracket included)
Shipping dimensions (W x D x H)	845.0 mm x 685.0 mm x 770.0 mm (33.27 in. x 26.97 in. x 30.31 in.)	860.0 mm x 670.0 mm x 887.0 mm (33.86 in. x 26.38 in. x 34.92 in.)
Rack height	10 RU	14 RU
Unit weight	43.6 kg (96.12 lbs, empty chassis with 2 fan modules)	68.3 kg (150.58 lbs, empty chassis with 2 fan modules)
Shipping weight	68.3 kg (150.58 lbs)	82.5 kg (181.88 lbs)

Environment and Reliability	RG-N18010-E	RG-N18014-E
Temperature	Operating temperature: 0°C to 50°C (32°F to 122°F) Storage temperature: –40°C to +70°C (–40°F to +158°F) Note: At an altitude between 3,000 m (9,842.52 ft.) and 5,000 m (16,404.20 ft.), every time the altitude increases by 220 m (721.78 ft.), the maximum temperature decreases by 1°C (1.8°F).
Humidity	Operating humidity: 10% to 90% RH (non-condensing) Storage humidity: 5% to 95% RH (non-condensing)
Altitude	Operating altitude: –500 m to +5,000 m (–1,640.42 ft. to +16,404.20 ft.) Storage altitude: –500 m to +5,000 m (–1,640.42 ft. to +16,404.20 ft.)
Mean time between failure (MTBF)	342,000 hours (about 39 years)
Fan	2 x pluggable fan modules (pre-installed)
Heat dissipation	Supervisor module and switch fabric module: front-to-rear airflow Line card: right-to-rear airflow
Acoustic noise	35°C (95°F): 55.9 dB 50°C (122°F): 73.4 dB
Supervisor module redundancy	1+1 redundancy
Switch fabric module redundancy	1+N redundancy
Power module redundancy	N+M redundancy (same model)
Fan redundancy	1+1 redundancy
Module hot swapping	Supported
Power module hot swapping	Supported
Fan module hot swapping	Supported
Cable hot swapping	All ports on line cards support hot swapping of cables. The switch-mode power supply supports hot swapping of power cords.
Power supply monitoring	Monitoring of the model, temperature, power, and voltage of the power module Power supply failure alarming Control of line card power-on based on the power supply status
Fan monitoring	Fan speed adjustment: 256 levels Fan failure alarming
Temperature monitoring	Over-temperature alarming
ESD	ESD contact/air discharge: 6 kV/8 kV ESD susceptibility contact/air discharge: 8 kV/15 kV
Surge protection	MGMT port: 4 kV Service port: 4 kV Power port: common mode 6 kV, differential mode 6 kV

Certifications and regulatory compliance	RG-N18010-E	RG-N18014-E
Safety regulation	IEC 62368-1
EMC regulation	EN 300386, EN 55032 Class A, EN 55035, EN IEC 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11
RoHS	European RoHS Directive 2011/65/EU & Amendment(EU) 2015/863

Software Specifications

Feature	RG-N18000-E Series
Ethernet Switching	Jumbo frame (maximum length: 9,216 bytes)
	IEEE 802.3az EEE
	IEEE 802.1Q (supporting 4K VLANs)
	Voice VLAN
	Super-VLAN and private VLAN
	MAC address-based, port-based, protocol-based, and IP subnet-based VLAN assignment
	GVRP
	Basic QinQ and selective QinQ
	STP (IEEE 802.1.d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)
	ERPS (G.8032)
	LLDP/LLDP-MED
IP Service	Static and dynamic ARP
	DHCP client
	DHCP relay
	DHCP server
	DHCP snooping
	DNS
	DHCPv6 client, DHCPv6 relay, and DHCPv6 snooping
	Neighbor Discovery (ND) and ND snooping
	IPv4 and IPv6 GRE tunnel
	IPv6 manual tunnel, IPv6 automatic tunnel, and IPv6 ISATAP tunnel
IP Routing	Static routing
	RIP and RIPng
	OSPFv2 and OSPFv3
	GR
	IS-ISv4 and IS-ISv6
	BGP4 and BGP4+
	IPv4/IPv6 VRF
	IPv4/IPv6 PBR
Multicast	IGMPv1/v2/v3
	IGMPv1/v2 snooping
	IGMP proxy
	IGMP fast leave
	PIM-DM, PIM-SM, PIM-SSM, and other multicast routing protocols
	Multicast static routing
	PIM-SM, PIM-SSM, PIM-SMv6, and PIM-SSMv6
	MSDP for inter-domain multicast
	MLDv1/v2
	MLDv1 snooping
	Multicast source IP address check Multicast source port check Validity check of IGMP packets
	Multicast querier
MPLS	MPLS L3VPN
	MPLS 6VPE and MPLS 6PE
	MPLS IPv6
	MPLS MIB (RFC 1273, 4265, 4382)
ACL and QoS	Standard IP ACLs (hardware ACLs based on IP addresses)
	Extended IP ACLs (hardware ACLs based on IP addresses or TCP/UDP port numbers)
	Extended MAC ACLs (hardware ACLs based on source MAC addresses, destination MAC addresses, and optional Ethernet type)
	Expert-level ACLs (hardware ACLs based on flexible combinations of the VLAN ID, Ethernet type, MAC address, IP address, TCP/UDP port number, protocol type, and time range)
	ACL80 and IPv6 ACL
	Applying ACLs globally (hardware ACLs based on flexible combinations of the VLAN ID, Ethernet type, MAC address, IP address, TCP/UDP port number, protocol type, and time range)
	ACL redirection
	Port traffic identification
	Port traffic rate limiting
	IEEE 802.1p
	Traffic classification based on 802.1p priorities, DSCP priorities, and IP precedences
	Congestion management: SP, WRR, DRR, WFQ, SP+WRR, SP+DRR, SP+WFR, and SP+WFQ
	Congestion avoidance: tail drop, RED, and WRED
	Rate limiting based on the inbound or outbound interface
	Eight queues on each port
Security	Multi-AAA
	RADIUS authentication, authorization, and accounting
	TACACS+
	IEEE 802.1X
	IEEE802.1X authentication, MAC address bypass (MAB) authentication, and interface-based and MAC address-based 802.1X authentication
	Web authentication
	Hypertext Transfer Protocol Secure (HTTPS)
	SSHv1 and SSHv2
	Global IP-MAC binding
	ICMP (discarding ICMP packets of which the rate exceeds the threshold on an interface)
	Port security
	IP source guard
	SAVI
	ARP spoofing prevention
	CPP and NFPP
	Various attack defense functions including NFPP, ARP anti-spoofing, DHCP/DHCPv6 attack defense, ICMP attack defense, ND attack defense, IP scanning attack defense, and customizing attack defense packet types
	Loose and strict RPF uRPF ignoring default routes
Reliability	REUP
	Rapid Link Detection Protocol (RLDP), Layer 2 link connectivity detection, unidirectional link detection, and VLAN-based loop control
	Data Link Detection Protocol (DLDP)
	IPv4/IPv6 ECMP
	IPv4 VRRP v2/v3 and IPv6 VRRP v3
	BFD
	Link monitoring, fault notification, and remote loopback based on 802.3ah (EFM)
	1+1 redundancy for supervisor modules
	1+N redundancy for switch fabric modules
	N+M redundancy for power modules
	1+1 redundancy for fan modules.
	Hot patching for online patch upgrade
	GR for OSPF/IS-IS/BGP
	BFD for VRRP/OSPF/BGP4/IS-IS/IS-ISv6/static routing
	Hot swapping of supervisor modules, switch fabric modules, power modules, and fan modules
Device Virtualization	VSU
NMS and Maintenance	SPAN, RSPAN, and ERSPAN
	sFlow (network detection technology based on packet sampling, which is mainly used for traffic statistics and analysis in heavy-traffic scenarios)
	N:1 mirroring, 1:N mirroring, and flow-based mirroring VLAN mirroring
	NTP and SNTP
	FTP, SFTP, TFTP, and Xmodem
	SNMP v1/v2/c3
	RMON (1, 2, 3, 9)
	Various types of RMON groups, including event groups, alarm groups, history groups, and statistics groups, as well as private alarm extension groups RMON used to implement Ethernet statistics, historical statistics, and alarm functions
	NETCONF
	CWMP
	gRPC
	OpenFlow Special 1.3
	Flow table analysis defined by all protocols Transmission of specified packets to the controller Configuring the controller's IP address and port Notifying port status changes to the controller
	Web-based NMS
VXLAN	EVPN VXLAN tunnel establishment LAN access to VXLAN IPv4 over IPv4 Distributed gateway IPv6 over IPv6 Using an SVI to connect to the VXLAN network Using a routed interface to connect to the VXLAN network Proxy ARP (replying with the actual MAC address)) ND proxy (replying with the actual MAC address) ND reply (replying with the actual MAC address) VXLAN static route Anycast gateway VXLAN bridging mode VXLAN routing mode Proxy ARP (replying with the gateway MAC address) Configuring the UDP port number in VXLAN packets Static VXLAN tunnel creation Layer 2 VXLAN bridge Layer 3 VXLAN gateway EVPN VXLAN

Resources All Resources

Learn about Products or Solutions

Product Datasheet

Software and Configuration

Order Information

Switches and Supervisor Modules

Model	Description
RG-N18010-E	RG-N18010-E chassis, eight line cards, two supervisor modules, and four SFUs
RG-N18014-E	RG-N18014-E chassis, 12 line cards, two supervisor modules, and four SFUs
M18000E-CM	RG-N18000-E high-performance supervisor module
M18000E-CM II	RG-N18000-E 2nd high-performance supervisor module

Power Modules and Fan Modules

Model	Description
RG-PA600I	600W AC power module, supporting redundancy
RG-PA1600I	1600 W AC power module, supporting redundancy

SFUs

Model	Description
M18010E-FE-X I	RG-N18010-E first-generation SFU
M18000E-FE-X II	RG-N18000-E second-generation SFU

Line Cards

Model	Description
M18000E-32XS-XB	32 x 1GE/10GE SFP+ ports (LC)
M18000E-52XS-XB	52 x 1GE/10GE SFP+ ports (LC)
M18000E-12CQ-XB	12 x 40GE/100GE QSFP28 ports (LC/MPO)
M18000E-24GT8SFP8XS-XA	24 x 10/100/1000BASE-T ports, 8 x 1GE SFP ports (LC), 8 x 1GE/10GE SFP+ ports (LC)
M18000E-48GT4XS-XA	48 x 10/100/1000BASE-T ports, 4 x 1GE/10GE SFP+ ports (LC)
M18000E-48SFP4XS-XA	48 x 1GE SFP ports (LC), 4 x 1GE/10GE SFP+ ports (LC)
M18000E-8SFX	CWDM line card for RG-N18000-E series core switches, providing 8 x SFX ports (64 x 10GE logical channels). The ports are backward compatible with a data rate of 1000 Mbps.
M18000E-8SFG	CWDM line card for RG-N18000-E series core switches, providing 8 x SFG ports (64 x 1GE logical channels)
M18000E-HCA	High-capacity line card for centralized authentication of the RG-N18000-E, supporting two HCA cards
HCA-20XS	20 x 1GE/10GE SFP ports (LC) The line card must be used with the M18000E-HCA card.
HCA-4CQ	4 x 40GE/100GE QSFP28 ports (LC/MPO) The line card must be used with the M18000E-HCA card.

Note:

1GE/10GE SFP+ ports support 1GE SFP transceivers and 10GE SFP+ transceivers.
40GE/100GE QSFP28 ports support 40GE QSFP+ transceivers and 100GE QSFP28 transceivers.

Optical Transceivers and Cables

1GE

Model	Description
Mini-GBIC-GT	1000BASE-X to 1000BASE-T, copper SFP transceiver, RJ45, 100 m over Cat 5e/6/6a The port needs to be configured with auto-negotiation
MINI-GBIC-SX-MM850	1000BASE-SX, SFP transceiver, 850 nm, Duplex LC, 500 m over MMF
MINI-GBIC-LX-SM1310	1000BASE-LX, SFP transceiver, 1310 nm, Duplex LC, 10 km over SMF
MINI-GBIC-LH40-SM1310	1000BASE-LH, SFP transceiver, 1310 nm, Duplex LC, 40 km over SMF
MINI-GBIC-ZX80-SM1550	1000BASE-ZX, SFP transceiver, 1550 nm, Duplex LC, 80 km over SMF
GE-SFP-LX20-SM1310-BIDI	1000BASE-LX, SFP transceiver, TX1310/RX1550, BiDi LC, 20 km over SMF
GE-SFP-LX20-SM1550-BIDI	1000BASE-LX, SFP transceiver, TX1550/RX1310, BiDi LC, 20 km over SMF
GE-SFP-LH40-SM1310-BIDI	1000BASE-LH, SFP transceiver, TX1310/RX1550, BiDi LC, 40 km over SMF
GE-SFP-LH40-SM1550-BIDI	1000BASE-LH, SFP transceiver, TX1550/RX1310, BiDi LC, 40 km over SMF
GE-SFP-LX03-SM1310-BIDI-I	1000BASE-LX, SFP transceiver, TX1310/RX1550, BiDi LC, 3 km over SMF
GE-SFP-LX03-SM1550-BIDI-I	1000BASE-LX, SFP transceiver, TX1550/RX1310, BiDi LC, 3 km over SMF

Note: BiDi transceivers must be used in pairs. If one end uses GE-SFP-LX20-SM1310-BIDI, the other end must use GE-SFP-LX20-SM1550-BIDI.

10GE

Model	Description
XG-SFP-SR-MM850	10GBASE-SR, SFP+ transceiver, 850nm, Duplex LC, 300 m over MMF
XG-SFP-LR-SM1310	10GBASE-LR, SFP+ transceiver, 1310nm, Duplex LC, 10 km over SMF
XG-SFP-ER-SM1550	10GBASE-ER, SFP+ transceiver, 1550nm, Duplex LC, 40 km over SMF
XG-SFP-ZR-SM1550	10GBASE-ZR, SFP+ transceiver, 1550nm, Duplex LC, 80 km over SMF
XG-SFP-LR10-SM1270-BIDI-I	10GBASE-LR, SFP+ transceiver, TX1270/RX1330, BiDi LC, 10 km over SMF
XG-SFP-LR10-SM1330-BIDI-I	10GBASE-LR, SFP+ transceiver, TX1330/RX1270, BiDi LC, 10 km over SMF
XG-SFP-AOC1M	10GBASE, SFP+ active optical cable (AOC), 1 m, including one cable and two optical transceivers
XG-SFP-AOC3M	10GBASE, SFP+ active optical cable (AOC), 3 m, including one cable and two optical transceivers
XG-SFP-AOC5M	10GBASE, SFP+ active optical cable (AOC), 5 m, including one cable and two optical transceivers

Note: BiDi transceivers must be used in pairs. If one end uses XG-SFP-LR10-SM1270-BIDI-I, the other end must use XG-SFP-LR10-SM1330-BIDI-I.

40GE

Model	Description
40G-QSFP-LSR-MM850	40GBASE-LSR, QSFP+ transceiver, 850 nm, MPO 1 x 12, 400 m over OM4 MMF, 300 m over OM3 MMF
40G-QSFP-LR4-SM1310	40GBASE-LR4, QSFP+ transceiver, 1310 nm, Duplex LC, 10 km over SMF
40G-QSFP-iLR4-SM1310	40GBASE-iLR4, QSFP+ transceiver, 1310 nm, Duplex LC, 2 km over SMF
40G-QSFP-LX4-SM1310	40GBASE-LX4, QSFP+ transceiver, 1310 nm, Duplex LC, 150 m over OM3/OM4 MMF, 2 km over SMF
40G-AOC-5M	40GBASE, QSFP+ active optical cable (AOC), 5 m, including one cable and two optical transceivers

100GE

Model	Description
100G-QSFP-SR-MM850	100GBASE-SR, QSFP28 transceiver, 850 nm, MPO 1 x 12, 100 m over OM4 MMF, 70 m over OM3 MMF
100G-QSFP-LR4-SM1310	100GBASE-LR4, QSFP28 transceiver, 1310 nm, Duplex LC, 10 km over SMF
100G-AOC-10M	100GBASE, QSFP28 active optical cable (AOC), 10 m, including one cable and two optical transceivers

CWDM Transceiver

Model	Description
SFG-LR-SM	Core switch side, 1G BASE-LR,SFG Transceiver, 8 different wavelengths (10km, LC)
SFX-LR-SM	Core switch side, 10G BASE-LR, SFP+ Transceiver, 8 different wavelengths (10km, LC)

FAQ Ask a Question

Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.

Education

5-Star Hotel Solution

RG-N18014-E High-density Large-buffer Core Switch for Cloud Architecture Network

RG-N18014-E
High-density Core Switch for Cloud Architecture Network