Dimensions and Weight	RG-AP720-L
Unit dimensions(W x D x H)	194 mm x 194 mm x 37 mm (7.64 in. x 7.64 in. x 1.46 in.)
Shipping dimensions(W x D x H)	460 mm x 360 mm x 242 mm (18.11 in. x 14.17 in. x 9.53 in.)
Unit weight	Main unit: 0.42 kg (0.93 lbs) Mounting bracket: 0.07 kg (0.15 lbs)
Shipping weight	0.87 kg (1.92 lbs)
Mounting	Wall/Ceiling-mount (a mounting bracket is delivered with the main unit)
Lock option	Kensington lock and securing latch

Wi-Fi Radio	RG-AP720-L
Radio design	Dual-radio and up to four spatial streams: ● Radio 1: 2.4 GHz, two spatial streams, 2x2 MU-MIMO ● Radio 2: 5 GHz, two spatial streams, 2x2 MU-MIMO
Operating frequencies	Radio 1, 802.11b/g/n: ● 2.400 GHz to 2.4835 GHz, ISM Radio 2, 802.11a/n/ac: ● 5.150 GHz to 5.250 GHz, U-NII-1 ● 5.250 GHz to 5.350 GHz, U-NII-2A ● 5.470 GHz to 5.725 GHz, U-NII-2C ● 5.725 GHz to 5.850 GHz, U-NII-3/ISM Note: Available frequency bands may vary with countries or regions. To use the above-mentioned frequency bands, ensure that they are supported in your country or region. For details, see WLAN Country or Region Codes and Channel Compliance.
Data rates	Combined peak data rate: 1.167 Gbps 2.4 GHz radio ● Two spatial stream Single User (SU) MIMO for up to 300 Mbps wireless data rate to individual 2SS HT40 802.11n client devices (maximum) ● Two spatial stream Single User (SU) MIMO for up to 144.4 Mbps wireless data rate to individual 2SS HT20 802.11n client devices (typical) 5 GHz radio ● Two spatial stream Single User (SU) MIMO for up to 867 Mbps wireless data rate to individual 2SS HT80 802.11ac client devices (typical)
Data rate set	The following 802.11-compliant data rates in Mbps are supported: 2.4 GHz radio ● 802.11b: 1, 2, 5.5, 11 ● 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 ● 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40) 5 GHz radio ● 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 ● 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40) ● 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT80)
Packet aggregation	802.11n/ac: A-MPDU and A-MSDU
Antenna type	Built-in omnidirectional antennas (two 2.4 GHz antennas and two 5 GHz antennas)
Antenna gain	2.4 GHz: 4.3 dBi 5 GHz: 5.7 dBi
Maximum transmit power	2.4 GHz radio: 26 dBm (23 dBm per chain) 5 GHz radio: 26 dBm (23 dBm per chain) Note: The transmit power is limited by local regulatory requirements. For details, see WLAN Country or Region Codes and Channel Compliance. Thailand 2.400 GHz to 2.4835 GHz, EIRP ≤ 20 dBm 5.150 GHz to 5.350 GHz, EIRP ≤ 23 dBm 5.470 GHz to 5.725 GHz. EIRP ≤ 30 dBm 5.725 GHz to 5.825 GHz, EIRP ≤ 30 dBm
Radio technologies	802.11b: Direct-Sequence Spread-Spectrum (DSSS) 802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)
Modulation types	802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

The following table lists the radio frequency performance of Wi-Fi including different frequency bands, protocols, and date rates. It is country-specific, and Ruijie Networks reserves the right of interpretation.

Wi-Fi Radio Frequency Performance	RG-AP720-L
Frequency Band and Protocol	Data Rate	Maximum Transmit Power per Transmit Chain	Maximum Receive Sensitivity per Receive Chain
2.4 GHz, 802.11b	1 Mbps	23 dBm	–91 dBm
	2 Mbps	23 dBm	–89dBm
	5.5 Mbps	23 dBm	–88 dBm
	11 Mbps	23 dBm	–85 dBm
2.4 GHz, 802.11g	6 Mbps	23 dBm	–89 dBm
	24 Mbps	23 dBm	–80 dBm
	36 Mbps	21 dBm	–76 dBm
	54 Mbps	19 dBm	–70 dBm
2.4 GHz, 802.11n (HT20)	MCS0	21 dBm	–83 dBm
2.4 GHz, 802.11n (HT20)	MCS7	19 dBm	–65 dBm
2.4 GHz, 802.11n (HT40)	MCS0	21 dBm	–80 dBm
2.4 GHz, 802.11n (HT40)	MCS7	18 dBm	–62 dBm
5 GHz, 802.11a	6 Mbps	23 dBm	–89 dBm
	24 Mbps	23 dBm	–80 dBm
	36 Mbps	21 dBm	–76 dBm
	54 Mbps	19 dBm	–70 dBm
5 GHz, 802.11n (HT20)	MCS0	20 dBm	–83 dBm
5 GHz, 802.11n (HT20)	MCS7	18 dBm	–65 dBm
5 GHz, 802.11n (HT40)	MCS0	19 dBm	–80 dBm
5 GHz, 802.11n (HT40)	MCS7	18 dBm	–62 dBm
5 GHz, 802.11ac (VHT20)	MCS0	20 dBm	–82 dBm
5 GHz, 802.11ac (VHT20)	MCS9	17 dBm	–57 dBm
5 GHz, 802.11ac (VHT40)	MCS0	19 dBm	–79 dBm
5 GHz, 802.11ac (VHT40)	MCS9	16 dBm	–54 dBm
5 GHz, 802.11ac (VHT80)	MCS0	19 dBm	–76 dBm
5 GHz, 802.11ac (VHT80)	MCS9	16 dBm	–51 dBm
5 GHz, 802.11n (HT20)	MCS0	20 dBm	–83 dBm
5 GHz, 802.11n (HT20)	MCS11	18 dBm	–65 dBm
5 GHz, 802.11n (HT40)	MCS0	19 dBm	–80 dBm
5 GHz, 802.11n (HT40)	MCS11	18 dBm	–62 dBm

Ports Specifications	RG-AP720-L
Fixed service port	1 x 10/100/1000BASE-T port ● In compliance with IEEE 802.3af standard (PoE) ● Auto MDI/MDIX crossover ● PoE-PD: 54 V DC (nominal) 802.3af/at/bt (Class 3 or higher) ● 802.3az EEE
Fixed management port	1 x RJ45 console port (serial console port)
Status LED	1 x multi-color system status LED
Button	1 x Reset button ● Press the button for shorter than 2 seconds. Then the device restarts. ● Press the button for longer than 3 seconds. Then the device restores to factory settings.

Power Supply and Consumption

RG-AP720-L

Input power supply

The AP supports the following two power supply modes:

● 12 V DC/1.5 A power input over DC connector: The DC connector accepts 2.1 mm/5.5 mm center-positive circular plug. A DC power adapter needs to be purchased separately.

● PoE input over LAN 1: The power source equipment (PSE) complies with IEEE 802.3af standard (PoE).

Note:

● If both DC power and PoE are available, DC power is preferred.

Overall power consumption

Maximum power consumption: 12.95 W

● DC powered: 12.95 W

● PoE powered (802.3af): 12.95 W

● PoE+ powered (802.3at): 12.95 W

● PoE++ powered (802.3bt): 12.95 W

● Idle mode: 6 W

Environment and Reliability	RG-AP720-L
Temperature	Operating temperature: –10°C to +50°C (14°F to +122°F) Storage temperature: –40°C to +70°C (–40°F to +158°F) Note: At an altitude in the range of 3,000–5,000 m (9,842.52–16,404.20 ft.), every time the altitude increases by 220 m (722 ft.), the maximum temperature decreases by 1°C (1.8°F).
Humidity	Operating humidity: 5% RH to 95% RH (non-condensing) Storage humidity: 5% RH to 95% RH (non-condensing)
Mean Time Between Failure (MTBF)	200,000 hours (22 years) at the operating temperature of 25°C (77°F)

Regulatory Compliance	RG-AP720-L
Security regulations	IEC 62368-1 EN 62368-1
EMC regulations	EN 55032 EN 55035 EN IEC 61000-3-2 EN 61000-3-3 EN 301 489-1 EN 301 489-3 EN 301 489-17
Radio frequency regulations	EN 300 328 EN 301 893 EN 300 440 EN 62311 EN IEC 62311 EN 50665:2017 FCC Part 15

*For more country-specific regulatory information and approvals, contact your local sales agency.

Software Specifications

Applicable Software Version	RG-AP720-L
Applicable software version	RGOS 11.1(9)B1P30 or higher

WLAN	RG-AP720-L
Recommended maximum number of active devices per AP	64
Maximum number of associated clients	256 Note The number of associated clients varies according to the environment.
Maximum number of BSSIDs	32 (up to 16 BSSIDs per radio)
STA management	SSID hiding Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently. Remote intelligent perception technology (RIPT) Intelligent load balancing based on the STA quantity or traffic
STA limiting	SSID-based STA limiting Radio-based STA limiting
Bandwidth limiting	STA/SSID/AP-based rate limiting
Wireless roaming	Layer 2 and Layer 3 roaming

Security	RG-AP720-L
Authentication and encryption	Remote Authentication Dial-In User Service (RADIUS) PSK, web, 802.1X and MSCHAPv2 authentication SMS authentication (used with the RG-WS series wireless access controller) MAB authentication (used with the RG-WS series wireless access controller) WPA (TKIP), WPA-PSK, WPA2, WEP (64/128-bit)
Data frame filtering	Allowlist, static blocklist, and dynamic blocklist
ACL	Dynamic ACL assignment based on 802.1X authentication (used with the AC)
CPP	Supported
NFPP	Supported

Routing and Switching	RG-AP720-L
IP service	Static IPv4 address IPv4 DHCP client FTP ALG and DNS ALG
Multicast	Multicast Multicast-to-unicast conversion
IPv6 basics	IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 Ping, IPv6 Tracert
IP routing	IPv4/IPv6 static routing
VPN	PPPoE client

Management	RG-AP720-L
Network management	Fault inspection and alarm Information statistics and logging SNMPv1/v2c/v3 NTP Server and NTP Client
Network management platform	Ruijie Cloud Web-based management (Eweb)
User access management	Console, Telnet, SSH, SNMP and TFTP-based management
Fat/Fit/Cloud mode switchover	When the AP works in Fit mode, it can be switched to Fat mode through an AC. When the AP works in Fat mode, it can be switched to Fit mode through the console port or Telnet. When the AP works in Cloud mode, it can be managed through Ruijie Cloud.

Resources All Resources

Learn about Products or Solutions

Installation

Installation Guide

Software and Configuration

Order Information

Model

Description

RG-AP720-L

Dual-radio indoor wireless access point

Data rate of up to 1,167 Mbps

Compliance with IEEE 802.11a/b/g/n and 802.11ac Wave2 standards

Fat/Fit/Cloud mode switchover

One uplink electrical port

IEEE 802.3af-compliant (PoE) power supply and DC power supply

FAQ Ask a Question

Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.

Education

5-Star Hotel Solution

RG-AP720-L, Wi-Fi 5 Dual-Radio 1.167 Gbps Indoor AP